Sibling to the A-Frame, the Arbor Crosscut Rocker Snowboard is a directional gravity-slayer built for riders who look at the epic contours of a pro-worthy mountain and see endless possibility. The Arbor Crosscut Rocker Snowboard has a slightly setback riding position for maximum float and Arbor s Sintered Crosslink Base for pace all over the mountain. This is the rockered version, hungry for free refills and softer conditions.
7 (1 Soft - 10 Stiff)
Grip-Tech – A tri-radial sidecut design that is not "blended." Natural shaping intersections, that in the past were eliminated, have been transformed into heel and toe contact points that provide a direct, more ergonomic way to grip the snow when additional control is needed.
Knucklehead Tip – Peak to parking lot with extra punch for powder.
0.87cm Taper – A shaping technique that narrows the profile of the snowboard towards the rear contact points. Tapered snowboards will have a wider nose and narrower tail, allowing the tail of the board to sink in deeper snow creating natural float and cleaner tracking.
FSC® Certified Double Barrel II Core – A progressive 1:2 Poplar to Paulownia blend with bamboo stringers running along the rails of the board for added torsional response and improved board control.
Mixed Glassing – A triax over biax lay-up that's best for versatility: pow, backcountry, groomers, jumps and more.
360° Rails – A 360°, fully wrapped sidewall that eliminates the need for tip fill, while effectively tying the whole snowboard together. A technology that delivers incredibly tight tolerances for improved board life and durability.
Recycled ABS – When a plastic alternative is unavailable, as in the case of ABS sidewalls, Arbor does its best to opt for a recycled material to improve the sustainability of its products.
Sintered Crosslink Base – Arbor's CrossLink base is a mid-density material that demonstrates increased speed and durability while maintaining ease of repair.
Zero Waste Base Technology – All of Arbor's die-cut bases feature Zero Waste Base technology. This process is essential to reducing Arbor's carbon footprint and eliminating waste during the manufacturing process.
Recycled Steel Edges – Arbor uses the most sustainable components possible. All edges are made from recycled steel. Highly durable, recycled steel edges embody both quality and sustainability.
Hand Dyed Ash Powerply – The Powerply works like an added layer of fiberglass. During construction, the natural wood or bamboo fibers are turned into a composite layer inside the board.
Bio-Plastic Topsheet – One of the materials Arbor uses in its quest to eliminate harmful petroleum based plastics from its production cycle. Made from castor bean oil, this eco-topsheet is extremely durable and water repellent.
Entropy Bio Resin – Starting with the 2020 line, Arbor is proud to announce that all Powerplys and R.A.P. Topless Tech veneers will be made with Entropy Bio-Resin, a replacement for traditional petroleum based resin that doesn't affect performance or usability. The ingredients that go into Entropy Bio-Resin are sourced as co-products or waste products of other industrial processes and are manufactured employing green chemistry techniques that reduce the carbon footprint of the material by up to 40% when compared to its petroleum based equivalent.
Factory Tuned – Arbor detunes the tip and tail contact points on all of its snowboards for a catch-free ride before they leave the factory.
Wend Natural Wax – All Arbor snowboards hit the shop floor ready to ride with Wend Natural Wax.
2x4 14-Pack Inserts
Size (cm) | 153 | 157 | 161 | 164MW |
---|---|---|---|---|
Effective Edge (mm) | 1114 | 1150 | 1186 | 1212 |
Tip Width (mm) | 292 | 295 | 299 | 310 |
Waist Width (mm) | 252 | 254 | 256 | 266 |
Tail Width (mm) | 283 | 287 | 290 | 301 |
Sidecut Radius (m) | 7.95 / 8.85 / 8.85 | 8.15 / 9.05 / 9.05 | 8.32 / 9.25 / 9.25 | 8.5 / 9.4 / 9.4 |
Stance Setback (mm) | 10 | 10 | 10 | 10 |
Rider Weight (lbs) | 104-184 | 110-190 | 116-196 | 122-202 |
Width | Regular | Regular | Regular | Mid-Wide |