Skip to Main Content

Dalbello Panterra 120 Ski Boots 2020

sku# 208310
Dalbello - Panterra 120 Ski Boots 2020
Model Info
This item is

Out of Stock

But fear not - there is plenty to explore...

Shop all Dalbello Shop sale Dalbello

Product Info

The Dalbello Panterra 120 Ski Boots are your key to unlocking the pleasures of the backcountry without giving up comfort or powerful downhill performance. With an adjustable last that ranges from 102 mm to 100 mm and plenty of room over the instep, the Panterra 120 can handle many high volume feet without issue, and the partially moldable IF Comp liners add another level of customization potential. An easy to use hike mode locks firmly into place for the descent.

Product Details

Fit

Last: 102 - 100 mm | Variable Volume FitDeveloped to permit skiers to regulate overall boot width from a range of 102 to 100 mm. Once VVF has been set, Panterra models may be skied, put on and taken off using remaining 3 buckles.

My Fit SystemThe Dalbello legendary fit got an upgrade in more than 60% of the boot range thanks to the My Fit System. Liner and shell can now be thermo customized in addition to the pre-molded Contour 4 shell which is included in every My Fit boot.

Adjustable Rear Cuff SpoilerModular rear boot cuff spoiler adapts the boot cuff to a variety of lower leg shapes. Spoiler permits skiers to increase rear cuff height, add rear support and change forward lean.

Contour 4Contour 4 creates subtle “comfort zones” at 4 critical fit points: ankle, heel, 5th metatarsal, & navicular. Relief contours molded into the inside lower shell at these 4 points provide a close and accurate fit and minimize the need for shell modifications.

Flex

Flex 120Stiff but not too stiff, this flex is the perfect compromise between all mountain mobility and big mountain control.

Liner

IF Comp Liner80% of this high performance fitting liner can be thermo formed in four minutes only. The special medium density of ultralon foam cushions the foot as great as it supports the power transmission.

Shell Materials & Design

Cabrio DesignThe Cabrio design is a 3 piece construction - shell/cuff/tongue – that comfortably secures the foot and lower leg while optimizing smooth and progressive flex. Dalbello’s Cabrio models provide the ultimate in responsive performance to ski your best.

Low Cuff Hinge PointThe low hinging cuff permits the boot cuff to more easily follow the natural anatomic movement of the skier’s legs because it has a longer range of forward and rearward hinging motion. For more efficient walking and gliding. Increased power and control with less energy.

CuffIrfran

ShellIrfran

TonguePA Griflex

Stance

Flex ControlBoot forward flex characteristics may be adjusted to suit skier’s weight, skill level, and snow conditions.

Adjustable Cuff AlignmentPermits skiers to align the lateral inclination of the upper cuff to the skier’s leg. Using 5mm Hex Tool, rotate the mechanism clockwise, or counterclockwise, to align boot cuff to desired position.

Ski/Walk Mode

Ski & Hike MechanismAs the burly cuff lock mechanism frees the upper cuff from the lower shell a long range of motion for functional hiking and climbing is guaranteed. Due to the unique Cabrio design it doesn't compromise skiing performance.

Buckles

Dynalink Heel Retention SystemThe instep buckle travels in a direct line to the skier's heel, allowing buckle tension to minimize heel lift and sliding.

Micro-Adjustable Aluminum BucklesA simple turn of a buckle! Micrometer buckles are easy to use for easy fit customization.

Inverted Forefoot BuckleForefoot closure buckles (above instep) are inverted to close on top of the bootshell, not on the side. The top closure positioning prevents buckle breakage and bending during rail slides, grinds, falls, and transitions.

Quick Macro Cuff Rack ExtensionExtra wide cuff buckle catch can be easily moved into 1 of 3 positions (total range = 30mm) without tools, enhancing the cuff fitting capabilities for a wide variety of leg circumferences and shapes.

Power Strap

40mm Velcro Strap

Sole

Replaceable ISO 5355 Alpine Soles

Specs

  • Ability Level: Advanced-Expert More 
    Advanced-Expert
  • Ski Boot Flex: Stiff
    Stiff
  • Forefoot Width: 102 mm More 
  • Liner Type: Semi-Custom
  • Flex Index: 120
  • Boot Sole Type: Alpine DIN (ISO 5355)
  • Alpine Touring Mode: Yes
  • Includes Tech Fittings: No
  • Number of Buckles: 4
  • Touring UsedFor: Burly
  • Warranty: 2 Years
Size 24.5
Boot Sole Length (BSL) (mm) 288

Other Notes

Dalbello products can only be shipped within the United States and Canada

Reviews

Q&A

Related Buying Guides

;
icon-returns icon-ruler icon-ruler-mini icon-compatibility icon-location