Skip to Main Content

How to Choose Snowboard Bindings & Compatibility Guide

Wondering how to choose your first snowboard bindings? This guide will walk you through the key considerations so you can get setup properly from the get-go.

Bindings are your direct connection to your snowboard and transfer your energy, so it's important to get a pair that works for your riding style and ability level. It ultimately comes down to preference, but it's important to consider the flex, type of binding, and compatibility with your board when choosing your snowboard bindings so you can have the best experience on the mountain.  

Riding Style and Flex

Your ability and style of riding will help determine what flex binding will work best for you. The flex is usually rated on a scale of 1-10 or 1-5, with lower numbers indicating softer flexes.

Binding flex mostly depends on personal preference, but there are a few helpful guidelines to get you started.

If you're a newer rider or spend a lot of time in the park, you'll likely prefer a softer, more forgiving binding. More advanced and freeride-oriented riders often prefer bindings that are stiffer and responsive at speed. Most people will fall somewhere in the middle, though, with medium flex bindings that offer balanced all-mountain performance.

You should also consider the flex of your boot when choosing a snowboard binding as well. Soft boots and stiff bindings will work against each other, so try to find boots and bindings with similar flexes.

Types of Snowboard Bindings

Strap in Bindings

These most common type of snowboard binding. They're easy to use, secure, and responsive and have been the standard for ages. Just slide your foot in, tighten the straps and you're ready to go.

Rear-Entry Bindings

Rear entry bindings can be identified by the reinforced highback and single strap at the toe. The highback of these bindings will pop open, you slide your foot into the strap and then close the highback onto your boot.

Step-On Bindings

The Burton Step On and K2 Clicker Bindings get you snowboarding quickly. They require the Burton Step On boots and allow you to easily slide your boot in and click your heel into place.

Snowboard Boot & Binding Compatibility

How Should Snowboard Bindings Fit My Boots?

Snowboard bindings come in general sizes that range from S to XL. It is essential to have the right size bindings for your boots, so always check out the manufacturer’s binding size chart on individual product pages to see what size binding you need.

After consulting the manufacturer’s size chart, it is critical to check that the binding fits your boots. Do this by placing your boot in your binding as if you were to strap in; the boots shouldn’t hang excessively off the bindings, nor should the straps be painfully tightened or have left over slack. If the strap ladder does not reach the ratchet, it may need to be adjusted - binding straps typically adjust from both sides in order to center the strap over your boot.

The heel should fit snugly in the binding. A properly fit binding should allow the boot to flex, but not sway. If you have comfortable boots, and the bindings securely grip your boots with no extra play, then you have a good match.


Binding Compatibility with Snowboards

Just like snowboards, bindings come with different options for mounting. There are a variety of mounting options and hole patterns on snowboards, and the binding's mounting disc holes have to align. In general, most binding discs are compatible with most mount patterns, but it's good to make sure. Luckily, most brands nowadays have "universal discs" or offer multiple discs to cover different types of mounting holes, double check the Binding Mount Pattern spec or reach out to our Customer Care team to make sure that binding will be compatible with your snowboard.

Snowboard Mounting Patterns

There are three different snowboard hole patterns that you will find on conventional snowboards. The patterns include: 2x4, 4x4, and The Channel™. Channel technology was originally specific to Burton Snowboards, although some board makers have begun liscencing Channel technology from Burton. 2x4 is a variation of 4x4 that gives the rider more mounting options.

4x4 is usually only found on entry level and children's boards, but it's important to note that some bindings come with mini discs that are not compatible with 4x4. The 4x4 pattern is too wide to accomodate the small discs, so these can only be used with 2x4 or The Channel™ system.

The Snowboard Binding Channel System

Chances are if you've spent any time around a snowboard, you've seen the channel system. This unique system can be found on all modern Burton snowboards and a couple of other binding companies, it offers a variety of stance variations and options. Understanding the ins and outs of this system is key to getting the most out of your gear and finding a setup that works well together. 

What is The Channel System

The actual Channel System refers to the two integrated slots that run parallel to the edge of the board and are the system used to attach your bindings to your snowboard. Allowing for a full range of customizable stances the Channel system allows you to slide your bindings down the length of the entirety of the snowboard.

Re:Flex™ vs EST Bindings

Burton's EST bindings bring out the best of Channel system's flex and are considered to be more comfortable since there is no hardware underfoot. The EST bindings will only mount to Burton's channel system.

How to Mount Channel System Snowboard Bindings


Channel System Binding Compatibility

These days, most binding companies have made their products compatible with the Channel system. Looking for bindings that say they are either Channel compatible, Re:Flex™ compatible or offer a universal mount disc are going to get you what you need. 

Be aware that some binding companies only make their higher priced bindings compatible with the Channel system. Generally, these companies sell a universal disc that you can purchase separately. Always ask if you are unsure if the bindings you're looking at are right for your set up. 

Oh and a friendly reminder... ALL Burton bindings will work on Burton snowboards.

Still have questions?

Reach out to our Customer Care team with any questions! We'd love to help you narrow down our wide selection of snowboard bindings and ensure that your snowboard gear will all be compatible together.
Shop Snowboard Bindings
See More

Learn More With Our Other Snowboard Guides:


Discover Our Favorite Gear:

The Best Snowboards
The Best Women's Snowboards
The Best All Mountain Snowboards
The Best Directional Snowboards
The Best Powder Snowboards
The Best Park Snowboards
The Best Splitboards
The Best Freeride & Big Mountain Snowboards
The Best Beginner Snowboards
The Best Men's Snowboard Boots
The Best Women's Snowboard Boots
The Best Snowboard Bindings
The Best Splitboard Bindings
The Best Snowboard Step On Bindings & Boots
The Best Kids' Snowboards
The Best Beginner Snowboard Boots
The Best Kids' Snowboard Boots

This is evo. We are a ski, snowboard, wake, skate, bike, surf, camp and clothing online retailer with physical stores in SeattlePortlandDenver, Salt Lake City, Whistler, Snoqualmie Pass, and Hood River. Our goal is to provide you with great information to make both your purchase and up-keep easy.

evo also likes to travel to remote places across the globe in search of world-class powder turns, epic waves, or legendary mountain biking locations through evoTrip Adventure Travel Trips. Or, if you prefer to travel on your own, check out our ski & snowboard resort travel guides, and mountain bike trail guides


Still have questions? Please give our customer care team a call at 866-386-1590, Customer Care Hours. They can help you find the right setup to fit your needs.